Slab Display Rack

The SD2003 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.

If your sales team spends more time fetching samples from the back than talking to customers, the 139 puts your entire collection at their fingertips — literally within arm’s reach of the consultation

Window display requires transparency — the rack should be as invisible as possible. The DISPLAY uses minimalist clamping hardware and a dark matte finish that visually recedes behind glass and frame s

Natural stone varies in thickness from 10mm to 30mm, and your display rack must handle that range. The SD059 slots accept the full thickness spectrum without adapter plates or shims.

Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SD021 uses a staggered front-to-back layout that shows every slab face from a single aisl

We engineered the SD807 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must no

The SG901 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.

We pre-drill and tap every threaded insert on the QT002 before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.

Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SG1006 has full-frame gusset plates at all four corners specifically to prevent this

Natural stone slabs are heavy, irregular, and expensive to replace. The RACK was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.

The DISPLAYS was first prototyped for a Dubai-based stone importer who needed display racks that could survive in 45°C warehouse heat without the powder coat peeling. That prototype is still in servic

The RACKS contact pads are made from EPDM rubber — the same material used in permanent outdoor gaskets. They won’t degrade, stain, or transfer color to light-colored stone surfaces.