Showing 21–40 of 61 resultsSorted by latest
We engineered the SW348 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must no
Each SW333 leaves our factory with a QR-coded inspection report showing the batch number, welder ID, coating thickness measurements, and the name of the QC inspector who signed off.
The SW339 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
If your sales team spends more time fetching samples from the back than talking to customers, the SW362 puts your entire collection at their fingertips — literally within arm’s reach of the consultati
We manufacture the SW340 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Stone importers tell us their biggest display headache is racks that develop a permanent lean toward the front. The SOLUTIONS has full-frame gusset plates at all four corners specifically to prevent t
We pre-drill and tap every threaded insert on the RACK before finishing, so the powder coat never fills the threads. Your assembly bolts go in clean every time.
Humidity in stone warehouses can be extreme. The STAND powder coat is applied at 90-110μm thickness — more than triple the industry minimum — with a zinc phosphate undercoat for corrosion resistance.
Granite distributors appreciate that the SG2012 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
We manufacture the SG917 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
Natural stone slabs are heavy, irregular, and expensive to replace. The SG918 was engineered around those realities — load-tested to 120kg per slot with a safety factor of 2.5.
The SG2007 frame uses CNC-welded joints throughout — every structural connection is a continuous weld bead, not a bolt and washer. This doubles the load rating compared to bolt-together designs.
We engineered the SG2072 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must n
Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SG2002 uses a staggered front-to-back layout that shows every slab face from a single ais
Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SG2006 uses a staggered front-to-back layout that shows every slab face from a single ais
We engineered the SG2063 center of gravity 40% below the frame midpoint after studying how customers interact with stone displays. They lean slabs forward to see the polished face, and the rack must n
When an architect visits your showroom to specify stone for a project, they need to see full slabs on display. The SG2064 presents each slab at a 7° tilt-back angle that keeps it stable without clampi
Stone showrooms face constant tension: display more products to sell more, but do not overcrowd the space. The SG2070 uses a staggered front-to-back layout that shows every slab face from a single ais
Granite distributors appreciate that the SG2067 frame is built from the same grade of steel used in structural scaffolding. It is overbuilt for display, which is exactly how it should be.
We manufacture the SG2074 in the same facility where we build industrial storage systems, which is why the load ratings on our display racks are conservative rather than aspirational.
